Hydraulic Ball Valve 2-48 Inch API 6D ASME B16.34 H2S Resistant

A hydraulic ball valve is a type of valve used in hydraulic systems to control the flow of fluid. It employs a ball with a hole or bore through the center that can be rotated to open or close the valve. When the ball is rotated 90 degrees, the bore aligns with the flow path, allowing fluid to pass through. When the ball is in the closed position, the bore is perpendicular to the flow path, blocking the fluid.

• Body: The main outer casing of the valve, typically made of metal such as brass, stainless steel, or carbon steel.
• Ball: Spherical component with a hole through its center, usually made of metal, that rotates to control flow.
• Stem: Rod that connects the ball to the actuator or handle, moving the ball when rotated.
• Seats: Sealing surfaces inside the valve body that ensure a tight seal when the valve is closed.
• Actuator or Handle: Mechanism used to rotate the ball, available as lever, handwheel, or automated actuator.
• Seals: O-rings or gaskets that prevent leakage around the stem and between the ball and seats.

• Nominal pipeline size: 2~48 inch
• Nominal pressure: 150~2500LB
• Temperature range: -46~250°C
• Fluid: Water, oil, steam and other kinds of fluid
• Body material: Material as specified in ASME B16.34
• Testing Standard: API 6D/6A
• Operator: Lever/Wrench, gear, motor actuator, pneumatic actuator, hydraulic actuator etc.